Isocheck Cradle System : suspended system for uneven concrete floors



Isocheck PRIMO & PRIMO HL Isocheck ULTIMO Isocheck 32T Isocheck 37T Isocheck 27C, 23C & 14C Isocheck 28T, 24T & 15T Isocheck RENOVO Isocheck Deep Batten Isocheck Shallow Batten Isocheck Cradle Isocheck Barrier Mat 5 & 10 Isocheck Impact Mat 100, 200 & 300 Isocheck Re-Mat 3 & Re-Mat 5 Isocheck Re-Mat Base 3 & 6 Isocheck Re-Cork 3 & Re-Cork 5 Isocheck Screedcheck XL5 Isocheck Screedcheck XL8 Isocheck Screedcheck XL10 Isocheck Phonewell Isocheck Absorba ceiling & wall panels Isowave System 23 for Walls Isowave System 23 for Ceilings Accessories

 
Datasheet
download
product data sheet
 
download
installation instructions
     


NHBC Tested

<

0845 838 3399

 

•  New build
•  Conversions
•  Refurbishments
•  May also be installed in conjunction with underfloor
   heating systems (see data sheet)

Isocheck Cradle system is designed to reduce sound transmission through uneven concrete floors.

Isocheck Cradle consists of a 5mm layer of Isopoli HD foam bonded to an injection moulded plastic cradle. The system includes levelling packers in various thicknesses as well as elevating blocks where extra height is required.

Isocheck Cradle is New Build Robust Detail compliant for masonry floor construction and were the structural sub floor has a camber or is irregular and needs levelling.

When installed as part of a complete party floor construction this system enables a concrete floor to meet the sound transmission standards of Approved Document E 2003 and subsequent amendments in 2004, 2010 and 2013.

Applications

To be used over uneven, cambered, level or unlevel concrete floors for conversions, refurbishments or new build.

Performance (on the two New Build Robust Detail constructions illustrated)

Treated floor meets with the New Build Robust Detail descriptive FFT2, typically within Robust Details EFC-1, EFS-1, EFC-2 and EFC-7. Two typical alternative constructions are shown above.

Compliance with Code for Sustainable Homes is possible; please contact Isomass for design advice.


Product data

Overall cradle size: 96mm diameter x 43mm
Height of base plate: 8mm
Resilient layer: Isopoli HD


Specification

The acoustic treatment shall be:

Isocheck Cradle system (complete with levelling packers), supplied by Isomass Ltd. Units 10 & 11, Avenue Business Park, Elsworth, Cambridgeshire CB23 4EY and installed in accordance with manufacturer’s instructions / recommendations.

Installation

Lay Isocheck Cradle with 18mm or 22mm chipboard Isocheck in brick bond pattern on timber battens (preferably stress graded) with all joints supported, applying adhesive to all tongued and grooved panel joints.

Apply Isocheck Acoustic Angled Flanking Band on the edges of the chipboard just before they are pushed against the perimeter walls to isolate the board from the wall.

Install skirting and trim off excess Flanking Band.

Full installation instructions for Isocheck Cradle are available to download by clicking on the link to the left of this page. Installation instructions must be used in conjunction with this information and/our information contained in the datasheet when laying the Isocheck Cradle floating floor system.

May also be installed in conjunction with underfloor heating systems.

PCT
Photo

To view a photograph mouse over the camera icon above




  • 18mm chipboard floor.
  • Isocheck deep Cradle with a (commonly used) 45mm x 45mm batten @ 400mm centres.
  • 130mm min. in-situ concrete (80mm min. fully supported) on profiled metal deck (left) or
  • 150mm hollow core concrete plank min. 300kg/m2 excluding screed (right).
  • Metal frame suspended ceiling with 75mm void and 10kg/m2 plasterboard or with100mm void and 8kg/m2 plasterboard.

 

 


 

 

© 2006-2015 Isomass Ltd. | Terms & Conditions | Privacy Policy | Accessibility Statement

 

Designed by jpatl.com